A Number of Tips on Finding Coins With a Metal Detector

For many metal detecting for coins can be a very profitable hobby and hopefully the tips on finding coins that we provide below will help you to not only find more but also better coins as well.
1.
Searching Previously Metal Detected Areas
Although these types of areas can prove very challenging and there may be finds few and far between there will always be something good left behind. Below are some tips for searching these types of sites.
Before you commence your hunt take a look in the area and come up with a plan for hunting it. Note areas that seem un-obvious to others as most people will often head for the easiest and obvious areas first. Head towards areas where there are bushes, shrubs or areas that are over grown as these are places that most people will avoid when they are out metal detecting.My video here is a prime example  of what I am talking aboutAlso go to areas where you think that have seen less metal detecting traffic such as round by fence lines or side walk strips.
Also dig in areas even if you only get a whisper or hint of something being there. Many people when out searching for coins or any form of treasure will move away from those areas where the signal is not strong.
2. Finding Deep Coins
This is completely different from finding coins that are on the surface (within 1-5 inches of the surface) and will generally give a strong signal. However deep coins are to be found in the 5-10 inch range and the response you get when you sweep the coil over them will be different. Often these coins will not sound solid and repeatable and instead will offer a whisper or jumpy signal that will in a lot of cases sound similar to the signal for rubbish that is located with a metal detector.
The easiest way in order to train your ears so that they become accustomed to detecting deep coins is to dig deep. So any time you pick up a signal that is deep and iffy then dig.
Hopefully the tips on finding coins provided above will help you when you are metal detecting in the future.
J C Christian is an avid follower of metal detectors and how they work. He runs an informational site that follows Garrett Metal Detectors, Fisher Metal Detectors, Tesoro Metal Detectors, and Kellyco Metal Detectors just to name a few.

What is the best metal detector?

If there is a definitive answer to this question, the undertaking of that machine is likely to put your competition out of business. The question should be, what is the best scanner to me? I noticed a low end metal detector, in the hands of the right person and the right, find many great destinations that were lost on a site covered by some of the most popular machines high-end circumstances. How is this scenario possible?

There are many factors that help or hinder objectives of finding in a given area and influence what detector would be the best for usted.incluyen, but not limited to, is the mineral soil, moisture, technical coverage and mentality of user at the time of the search user control unit, the size and type of coil, knobs.

User mindset is so important in determining success. I don't have a mindset of treasure hunting, but rather a treasure find thought process. Within minutes, let the old foundry building in the Avenue of Disston of Tarpon Springs, Florida.I have never hunted this site and I am aware of anyone that ever find allí.Sé than when the building was built and has a high expectation of finding silver, as well as Buffalo and war Nickels. My search techniques is fundamental here too.

What area is well covered and techniques will impact success more to the choice of instrument to search for any sitio.El smelter construction site loaded with spam, as he was recently installed a new roof and new and old roofing nails, as well as the nuts and bolts of a foundry will be abundant. The search area is only about 10 per 100 feet and slowly overlapping coverage to walk the length will be used first. Below will change the pattern and methodically walking width.

April is not normally a very humid month in Central Florida. This year is an exception and the ground has a good level of moisture with a couple of days of good rain this week. This will allow me to use a detector with a 3-4 inches for an area very quaint work coil and not lose too much depth. An area not telenoticias and land dry that they lead me to use a 7-8-inch coil or an 8 by elliptical 9 inch.

I do not know the mineral content of Foundry site but soil will balance my scanner to start the search. Many less than half the price of detectors are calibrated by minerization land factory and cannot accommodate the instrument except for lowering the sensitivity setting to control the noise signal soil mineralization. Adjust other settings in the detector can increase their level also. Here is a secure method of testing to see if a detector is better than another. Hunt a site specific or part of it very carefully, and then look again in the same way but lower their level of sensitivity to half.If you can say that on the second search finds were really missed goals then hunting area again but this time reduce rejection down iron only. If you find enough goals at this time to justify another search, keep all configurations of the same level, but increase sensitivity to the level of the first search. Many of its objectives are now hunting will be 2-4 the junk or spam due to rejection control levels. This experiment should be evidence that objectives losses are probably about levels of control that a detector that is better than another.I used about metal detectors of 15 different manufacturers in my almost 40 years of the discovery of the Treasury.I know that listeners best for me, but a different setting and sites will even change my mind about what is the best.

Here are the results to this test to work with my favorite detector Foundry site Saturday pasado.Un dollar average 1898 Barber was a surprise as the turn 2 5th century Nickels.Esperaba were find coins of WWII era and very fine S 43 mercury and 43 and 45 nicknames war met my treasure to find ways of thinking.A 1939 and a 1942 cents wheat were welcome additions along with a 1964 dime Roosevelt.Yes, dug up a bunch of garbage to be able to locate those nickels, but I know what is the best metal detector.

Here is "diggin"! Larry

http://MetalDetectorForCoinCollecting.com

Larry Smith is an avid coin detectorenthusiast collector and State metal.Ha collecting coins for more than 50 years. Larry is giving his ebook, "Coin Collecting with The Home Town Advantage" free time limitado.puede get a copy and start building (or expanding) its own collection right now.

Get the ebook (and tons of other great free content) by visiting his blog now:

http://MetalDetectorForCoinCollecting.com/Free-Report

A Review of Popular Metal Detector Products

Metal detectors come with a control box that contains the circuitry, controls, speaker, batteries and the microprocessor; a shaft that connects the control box and the coil; a search coil that actually senses the metal; and a stabilizer that keeps the unit steady as it is moved. The performances of the detectors are based on the features of these parts.

Tesoro Metal Detectors

At less than 2½ pounds, the Tesoro Golden Max lets you control what you want to find. It is the lightest detector in the market with full size depth, sensitivity, four tone audio ID and a user adjustable Notch Filter Discriminate. The Tesoro DeLeon is a Target Identification Detector (TID), named after the famous explorer Ponce de Leon, who searched Florida looking for treasure and the Fountain of Youth. The DeLeon is designed as an easy to use, turn-on-and-go detector.

Whites Metal Detectors

The Whites E-series metal detectors include the following models. DFX(TM) brings together the ultimate combination of sophisticated microprocessor technology, and turn-on-and-go simplicity. It has an operational frequency of 3 kHz and 15 kHz. The XLT® Metal Detector is high-performance simplicity and versatility at its best. It has five programs to choose from along with 10 Basic Adjustments, and 29 Pro Options. The MXT has three completely separate operating modes -- gold prospecting, coin/jewelry, or relic.

Prizm series

The Prizm series include Prizm II, III, IV, and V. All have a pinpoint mode that zeroes in on target location, instruction videos that show when and where to hunt.

Fisher Metal Detectors

Dr. Gerhard Fisher, a German immigrant, obtained the first patent ever issued on aircraft radio direction finders in the late 1920s. Fisher's 1266-X comes factory shipped with 8-inch Open Center Spider Coil, instruction manual and Fisher's 5 Year Warranty. It has a duel discrimination system, which will allow you to search at a great depth. This unit does not work very well on wet saltwater beaches.

Garrett Metal Detectors

The Garrett Super Scanner hand-held detector can detect a medium-sized pistol from distance of 9"" and even a tiny 1" piece of jewelry. Simplicity of operation of this metal detector is unmatched. The Garrett SuperWand Security metal detector is one of the most popular metal detectors. It provides uniform sensitivity 360° along the scan area and pinpointing at the tip to detect weapons and other metal objects with extreme accuracy. The Garrett Magna Scanner PD 6500 Walk through metal detector has some unique features. Its ultra-enhanced multi-coil detection field pinpoints the exact location of any metal object within 33 distinct areas of the archway.

Bounty Hunter Metal Detectors

Bounty Hunter metal detectors are made by First Texas Products. The Tracker IV priced at $160 is streamlined in appearance, with only two operating controls and a mode selection switch. The Tracker IV has a built-in Automatic Ground Tracker that maintains ground balance. The Bounty Fast Tracker offers value for your money. It is a user-friendly instrument that delivers effective performance over a wide range of conditions and applications.

Minelab Metal Detectors

The Minelab Explorer II priced at approximately $1395 is a coin and jewelry detector with an operating frequency between 1.5 - 100 kHz. The signal travels deeper at a lower frequency and the signal detects objects close to the surface at a higher frequency. The Minelab Quattro MP, priced at approximately $1300, is suited for use in parks, beaches or the battlefields. Minelab's FBS technology provides outstanding performance even on saltwater beaches.

Metal Detectors Info provides detailed information about walk-through, hand-held, and used metal detectors, as well as reviews of best metal detectors. Metal Detectors Info is the sister site of Security Cameras Web.

Accesories That Are Useful Together With The Metal Detector

Professionals and hobbyists use metal detectors. A geologist may use it to study minerals in the earth while those who do this for fun just want to find a some old coins or even jewelry and make a profit.

Regardless of the purpose, the individual still needs to get a metal detector to make this work. There are many brands out there in the market that look the same from the outside but once it is used; the person will be able to tell the difference.

Metal detectors may cost from $100 to more than $1200. This really depends on the skill level of the individual and what it is used for.

These devices are made of three major parts. These are namely the control boxes, which houses the battery, the microprocessor and the speaker, the shaft and lastly the coil, which is what the person uses in detecting metallic objects.

If the individual wants to save up on money, the best thing to do will be to buy the basic unit. This can be upgraded later on by investing in other accessories such as a larger coil, a longer shaft and even a headset to be worn when searching for buried treasure.

Aside from upgrading the metal detector, the person should also get some stuff that will be useful when the device senses something on the ground, which usually are the digging tools.

Carry this around may be hard while holding the detector on one hand. The best way to go searching will be to buy a bag preferably a knapsack or a duffel type version so this can be slung on one shoulder when moving along the assigned area.

Accessories for metal detectors can be ordered from the manufacturer online. The customer can pay for this using one's credit card, which does not include shipping, and handling meaning a few more dollars have to be added to the total amount.

If the price in the store is much cheaper, then it is better to get it here than online since the person can pay for this using cash, credit card or check. There is a chance that the preferred brand does not have its own store, which is why the company permits distributors to see the product.

It is possible to get a discount on certain accessories if the customer decides to buy two or more. This depends on the entirely on the retailer because some give these as freebies if the model chosen is one of the new ones that costs a bundle.

Low Jeremy maintains http://metal-detector.articlesforreprint.com. This content is provided by Low Jeremy. It may be used only in its entirety with all links included.

Bounty Hunter Commando Metal Detector

TITLE

Price: $199.00

Click here to buy from Amazon

Best Gold Metal Detector for Your Use

A metal detector is not much of a complex device. It has three basic parts. The first one is the coil which can come in different shapes, a power supply and a control box. Bulk of the job rests on the control box because it is that one part that is ticked when there is metal around and this ticking is what causes the metal detector to do its job.

Even the entire process of how the device works can be simplified in two sentences but then again there is a degree of difficulty concerned when we talk about a detector who is trying to detect a specific kind of metal.

Of all the different kinds of metal detectors, probably one of the most important is the gold metal detector. It is pretty obvious that gold is an element that is worth a lot in many ways and this makes gold metal detectors a prized possession as well.

How metal detectors identify various metals is by testing the conductivity of the metal. A target signal is eliminated for unwanted metals like leftover iron & steel, pull tabs, bottle tabs and others in the same group while increasing target signals to high conductive metals as gold along with brass and silver.

Apart from gold hunting, coin & relic hunting are also expensive areas of metal detecting. The other interesting thing is the underwater & wading detecting. The use of metal detectors in these areas gives the device a character that will not square it into a box as just a device for security measure.

The differences of these metal detectors lie in their technology, type of ground balance, frequency it operates in and of course the capability to discriminate between the many types of metals.

Going back to gold metal detectors, gold mining companies invest in high quality gold metal detectors because they really need to find the best one in order to stay, survive or earn in the business.

If you are able to find the best gold metal detector that means it will be easier for the workers to find this precious metal meaning more money for everyone if you will not be successful then it means you invested in an equipment that is not so helpful. In the latter's case, you might need to discard your existing equipment and buy a better one or upgrade your existing one.

Low Jeremy maintains http://metal-detector.articlesforreprint.com This content is provided by Low Jeremy. It may be used only in its entirety with all links included.

Buying a Used Metal Detector

Buying a used metal detector should be a well thought out process before you jump the gun and purchase just any detector. The process should follow the questions below. Once you answer each question, you will be ready to purchase a detector and start hunting.

Who Am I buying The Detector For?

The majority of metal detectors available either used or new are geared towards the adult user. If you are looking to purchase one for a child, get a model or brand that is described as being a detector for children. These machines can be too complicated for a kid to grasp. Teenagers should not have much of a problem using most of the available detectors but may need a little tutoring from an adult when getting started.

What Type Of Hunting Will I Be Doing?

Metal detectors basically fall into two groups: land units and underwater units. Most of the underwater detectors can be used on land, but you cannot take a land detector underwater. If you plan on looking for sunken treasure on your next diving adventure, be sure to get an underwater detector.

There are also detectors made for the various types of land hunting - coin and jewelry, relics, gold, etc. Each of the major manufacturers like White's, Garrett, Tesoro, Bounty Hunter, Minelab and Fisher make and have made metal detectors specifically suited better for certain types of treasure hunting. You need to decide what you will primarily hunt for and pick the appropriate brand and model.

Which Metal Detector Should I Buy?

After deciding how you will use your detector, you need to learn more about the older metal detectors that you usually find used. To do this consult the online forums such as FindMall or TreasureNet. Many of the forum members have been metal detecting for years and have used many different brands and models. You can benefit from their experience! Another method is to read the ads in the older treasure magazines such as Lost Treasure, Western & Eastern Treasure and True Treasure. In some of these magazines, you can even find tests conducted on certain models of metal detectors.

Unless you will be relic hunting somewhere in a rural area, be sure to get a detector with discriminating capability. The discriminating metal detector will allow you to tune out most junk such as pull tabs from aluminum soda cans, foil and bottle caps. If you're looking forward to a search in a local park, you will definitely need to block signals from junk!

How Much Should I Spend?

Once you decide on the brand and model, spend as little as possible on the used detector. Keep an eye on the market for this detector by using an auction site such as eBay or others. You will find that used metal detectors will usually go for about the same price time after time. The going price may vary a little depending what accessories may or may not be included. With this research, you will be equipped with the knowledge to buy your detector at the market price or even lower.

NOTE: Check pricing often so you can jump on any deals that may appear.

Where Can I Buy A Used Metal Detector?

Just like exercise equipment that gets little or no use by their owners, metal detectors are often used very little and are just left in the garage or basement gathering dust. This is a good thing for you!

If you do not care to wait, you can find used metal detectors at garage/yard sales, pawn shops, flea markets, newspaper classifieds and estate sales. You may not have the advantage of finding a specific brand or model, but you can usually find a good deal.

You can also find a metal detector at the online classified ads sites such as CraigsList. Be very cautious when buying this way and insist the seller provides a telephone number so you can discuss the detector before any purchase.

When you're shopping for a specific machine, the best place to find them are at the online metal detector stores and auction sites such as eBay or others. Most of these sites accept Paypal or credit cards for the purchase. In either case, you will be covered in case the detector has a problem.

The author has been a metal detector user for 30+ years and has used most of the top metal detectors during that time. He actively operates an online used metal detector store at http://www.UsedMetalDetectorsStore.com where you can find used metal detectors as well as detector manuals and information.

Choosing Your Metal Detector

If you are planning on going treasure hunting, one of the best tools you can buy for the job of finding precious metals, coins, and relics is a metal detector. Metal detectors come in all different models and versions from all different manufacturers. Here are some thoughts about the wide array of detectors available to you...

This is a list of some of the reputable brands of metal detectors available today: Tesoro, Whites, Minelab, Garrett, Bounty Hunter, C-Scope, Fisher. As you can see, there are plenty to pick from! Which company should you go with? It is mostly a matter of personal preference. The different brands have different looks, average prices (higher-average, lower-average), and different models designed especially for certain purposes.

Here are some ideas about a few of the companies listed above... Tesoro Electronics builds quality metal detectors. I own a Tesoro Compadre model metal detector and have found it to be a very good quality metal detector, especially as a starter metal detector. Tesoro detectors are distinctive for their cool model names, western-looking colors on their detectors, and the fact that many of their models don't have a screen, just the control knobs. If you feel like you must have a screen or a meter that tells you how deep the target is, or maybe even makes a guess at what the target is, try a Whites. Whites is a legendary company, a name sort of like Case to knife collectors. As such, many of Whites detectors are pretty high priced, but you can still get their basic detector for around $200. Bounty Hunter metal detectors are popular and widely advertised. The Bounty Hunter line includes inexpensive kid and starter detectors, and advanced models.

These are just some ideas to get you started. The idea though, is that there are plenty of metal detectors available, just find one you like and go with it, have a great time metal detecting!

If you are interested in more information about metal detecting, please visit:

http://hubpages.com/hub/good-places-for-relic-metal-detecting

Thanks for reading!

Fisher F-2 - A Super Start-Up Metal Detector

I have been a big fan of Fisher Metal Detectors since the early 70's. I have owned 15 different models and found nearly 100,000 coins and nearly 400 gold rings utilizing these fine instruments. from the Medalert 11 to the cz20, I have only had to have one repaired as Fisher makes durable, quality machines that pay for themselves over and over again. I am very excited about the latest start-up unit the F-2. The 1210 and 1212x units were and are amazing start-up machines, but I can only say WOW when I use the F-2. Contact a Fisher dealer and grab this unit up while the 4" coil is still a bonus. I would! It is the best machine for the buck that I have owned. This innovative detector has more features than most detectors selling in the $500 to $600 range.

Here are the F-2's Feaures:

Target Display with numbers from 0 to 99 (very large numbers)

Depth Meter

Battery Meter

Sensitivity Control

Target Groups for Notch

Tone ID

Pinpoint Button

Power Button

Adjustable Settings: Sensivity, Discrimination, Notch

All of this for $199. The F-2 comes with a stock 8" coil plus a hot 4" coil with extra lower rod and hardware. Again I say WOW!

I took the F2 to my test gardens to see what it is capable of doing. With the standard 8" loop I was able to detect every coin buried up to eight inches deep. Silver dimes at 6 to 7 inches were weak signals as were silver quarters at 7 to 8 inches. Wheat cents gave good signals down to about 5 to 6 inches and old nickels came in at 6-7 inches in both of my 5 Feet square gardens. This is very impressive depth for a low end detector. My amazement with this light weight unit dramatically increased when I switched to the 4 inch coil and went to my trash garden to give it a real workout and test its TID system. This 3 feet square garden has a variety of pop tops and pull tabs going all the way back to the early 70's plus pencil erasers, foil, chewing gum paper/packages, etc. All the junk you would find in a schoolyard or sport stadium plus new and old coins in close proximity.

The newer pull tabs read between 33-35 and most nickels read at 30 to 32 with a few hitting 33. In a matter of minutes I could distinguish between almost every tab and both my older and newer nickels. Incredible! No nickel read higher than 33 and most tabs read 34 or 35. I have never found a start-up unit that can do this. Tesoro has some of the best differentiating units for nickels verses tabs, but my units selling for $500 -$700 dollars did not outperform the F-2. The Fisher 4" coil also proved itself depth wise. The nickels and dimes at 5 to 7 inches deep came in very clear, the target system was very stable and the response speed on this coil is fantastic. I was so impressed with this small coil, that I chose to use it at the beach, my high school stadium and old school yard test spots.

In a four hour period at Sponger Stadium, I dug up 211 coins with a face value of $19.55. Nothing old and exciting as field was built after silver disappeared from circulation. Yet 53 coins an hour is very good production. That is almost a coin a minute. This is my 2nd highest four hour total at this stadium in more than 35 years hunting there. In 1985 using a Fisher 1260 with a 4" coil, I took 244 coins in this time period. That was the premier top of the line detector of that time frame and I paid over $400. on a Christmas special. Do you understand why I keep saying WOW about this F-2?

At my old school yard the most aggravating signal is the aluminum pencil erasers that can be found eveywhere. My wife was in the first graduating class of this elementary school back somewhere in the 50's (I dare not age her). I tried to find out why this school has 10 times more aluminum erasers than any other schoolyard I have hunted. She and none of her school buddies could answer my question. Guess what? It is no longer a problem. From my trash garden, then to the school grounds, I learned to target and notch this menace out. In 2 hours I found 20 coins including a 1913 Canadian Quarter, a 1936 Buffalo Nickel and 2- 1945 wheat cents and did not dig up one pencil eraser. This school closed down a few years ago and any coins are leftovers as the grounds are fenced in and only a few people are given permission to even walk the old campus grounds and play areas.

I have used top of the line Garrett, White, Minelab, Tesoro and Bounty Hunter units along with my Fisher cz20 and have found fewer coins than this. My trip to the Tarpon Springs Beach with the F-2 was short-lived as rain came within 10 minutes. However, I did recover a nice sterling earring and three pennies. I will not use this instrument in the water as fresh or salt water intrusion would desroy this great little detector. In fact, I am convinced that the F-2 with its 4 inch coil will outperform any detector with a similar size coil. It is fast, it is stable and it goes very deep. WOW! I would charge no less than $60-$100 for the 4" addition. Here's to "diggin it"! Larry

http://MetalDetectorForCoinCollecting.com/free-report

Larry Smith is an avid coin collector and metal detector enthusiast. He's been collecting coins for over 50 years. Larry is giving away his ebook, "Coin Collecting With The Home TOwn Advantage" FREE for a limited time. You can get your copy and start building (or expanding) your own collection right now.

Get the ebook (and TONS of other great FREE content) by visiting his blog now:

http://MetalDetectorForCoinCollecting.com/free-report

Metal Detecting Tips: How to Metal Detect for Beginners. Learn How to Find the Best Metal Detector for Coin Shooting, Relic Hunting, Gold Prospecting, Beach Hunting, Treasure Hunting and More.

This book is a complete guide to metal detecting. The author put everything he knows about metal detecting into simple, understandable language so that you can easily learn all there is to know about uncovering buried treasures. Inside the book you will learn:

- The various types of metal detecting.

- The features of a metal detector and how to get the best detector for the right treasure.

- All the tools you will need to get at your buried items (coils, diggers, scoops, etc.)

- How to use a metal detector.

- Tips and pointers - where to look for your treasure.

- How to find treasures while enjoying a beautiful beach setting.

- Key research tips about understanding your site and making sure you will find everything that can be found.

- Extensive list of metal detecting sites and ideas on how to find new ones.

- What you need to know about the law and how to make sure the government will not confiscate your treasure.

- How to obtain permission to search on private properties, including a sample permission letter and liability waiver form.

...and much more.

If you've ever been interested in metal detecting, but didn't know where to start, then I encourage you to learn from the author's experience and get started on the right footing. This book contains everything you need to know to start metal detecting in no time!

Price: $14.95

Click here to buy from Amazon

Professional Underwater Scuba Diving Metal Detector

Brand New Latest Model Proffesional Underwater Metal Detector
This Professional Grade Underwater Metal Detector comes with a Search Coil Diameter of 10 Inches
The Metal Detector can be used both in salt water and fresh water or land
This Metal Detector has been manufactured with superb quality and has a great pro performance
Not only has high sensitivity but can also distinguish between different metal types
This can help users to find lost coins, Gold, Silver, Jewelry and metal objects

Price:

Click here to buy from Amazon

The Metal Detector Book

How to find the treasures that hit the headlines. Updated and expanded, the classic guide to treasure hunting with a metal detector. Sixteen chapters of practical advice and theory. From coin shooting to hoard hunting, all for less than one issue of a monthly magazine! Introductory Kindle price.

Price: $2.99

Click here to buy from Amazon

Searching For Treasure Using the Pionner Metal Detector

Hunting for buried treasure is no longer something that kids do for fun. Adults are also getting into this thanks to the handy metal detector.

One model doing quite well in the market is the Bounty Hunter P110 Pioneer Metal Detector with Automatic Ground Trac.

This type of metal detector is hand held so all the user has to do is point it toward the ground. It comes with headphones and once this is adjusted to the right sensitivity, the person will be able to find anything such as coins, jewelry and anything else metallic.

The individual does not have to bend over to get a signal because it comes with an extended arm rest with an S-rod handling system and a 8 inch waterproof search coil so that anyone using it won't get tired scanning for objects.

This model is powered using 2 9 volt alkaline batteries. It will be a good idea to check on this to maximize the use of this machine. The individual can buy this online from the manufacturer for just below $100, which comes with a 5 year warranty.

Before using the device, it will be a good idea to read the manual to be familiar with each part and how the switches work. The person should also practice this first in the garage to be able to distinguish between something valuable or junk when going treasure hunting in the field.

There is a term for this, which is better known by metallurgists as method discrimination. Aside from hearing the sound that is reflected to the machine, it is also possible to determine what is down there by reading the numerical readout seen on the display case.

When the metal detector is not being used, it will be a good idea to take out the batteries and store the device in a safe place. This will prevent it from being damage by the elements increasing the chances of finding something every time.

A good tip for those who want to go treasure hunting will be to work in groups. This will speed up the process in searching a wide area so that the people can move on to the next grid if nothing has been discovered.

The model offered by Pioneer is just one of many brands that are being offered in the market. The customer can also check these out by going to the store or checking online but nothing comes close to this effective and hand held device which is always great to have around.

Low Jeremy maintains http://metal-detector.articlesforreprint.com

This content is provided by Low Jeremy. It may be used only in its entirety with all links included.

Treasure Hunter All Vision Pro Metal Detector Free Headphones and Spidercoil Upgrade $89 Value

The TREASURE HUNTER All Vision Pro Professional model is equipped with a powerful Z-96 Computer Microprocessor which combines with Treasurehunters® Patented Technology to offer more features, performance and value than any other detector in its price range. Whether sweeping the search coil ultra fast or ultra slow, the TREASURE HUNTER All Vision Pro will detect targets with tremendous accuracy.
Price: $395.95

Click here to buy from Amazon

Should I Buy a Metal Detector?

One of the more enjoyable and profitable family hobbies is treasure hunting with a modern metal detector. It's not just the finding of old coins and lost jewelry, it's the outside fresh air and the exercise that is good for the body. Getting the whole family involved turns this exciting hobby into quality time spent with your spouse, children or grandchildren.

Many find this to be a financially rewarding hobby as well. The really big finds are not just being found by professionals. Thousands of treasure hunters have found that coin shooting can be very profitable.

Treasures of all kinds are being found: gold and silver coins, war relics, jewelry, gold nuggets, and even old rare bottles from trash dumps from the old ghost towns or home places.

With a little research you can find the old treasure stories in your area.... the old timer who buried his gold and silver coins or an outlaws hidden stash from the past. It takes research and a good metal detector to help you pinpoint the find.

If you use your detector seriously, it could easily pay itself many times over with the old coins and artifacts that you can find. Many people think that treasure hunting requires you to dig big holes to recover lost coins and jewelry. It doesn't work that way because the lost objects are not always that deep, but there are times when you know it's time to dig deep!

It's more of the decomposing leaves, sticks, and grass that make up the top soil. It takes a long, long time for items to actually sink into the ground.

A perfect example of this is hunters finding large cents and colonial coins at only a few inches deep. We consider a deep coin at about 6 - 8 inches. If the ground has not been disturbed, (top soil is there) you will sometimes get a deep detector reading which will require you to dig deeper. With most of the top brand detectors -White's, Garrett, Fisher, Tesoro, Bounty Hunter, Teknetics, Minelab, etc- that's not a problem. They have the depth capabilities for any old deep coin.

You will not regret starting this hobby. Who knows, you may even make one of those big finds!

Help promote the hobby and donate any ancient and historical finds to your local museums and societies!

The author has been using metal detectors for over 30 years and is the owner of used metal detectors store.com.

Treasure Hunting with the Troy Metal Detector

People who want to look for buried coins or jewelry should have a dependable metal detector at all times. This will make it easy to discover something when the alarm starts sounding and all the individual has to do after that is dig.

There will be times that the user will find junk while other times, something interesting. Regardless of whatever, at least the person can say that the machine that was purchased works.

One company that has been in the business of metal detection is Troy. Through the years, the firm has developed different models from the Shadow X2 to the X5 that can be used by professionals and amateurs.

The Shadow X2 is the most basic model. It is hand held and comes with an extended waterproof coil at the bottom. This device is battery operated and has a settings box in the center allowing the person to adjust the sensitivity when going treasure hunting.

Unfortunately, this model is quite old and is no longer being produced. This is the reason that those who are really serious about looking for buried treasure can try the Shadow X3 that has more features than the basic model.

This is lighter than the previous model and unlike other brands, this thing is only powered by a single 9 volt alkaline battery. The individual can probably get one of these for $899 in the market.

If anything goes wrong, the company will be happy to fix it since each metal detector has a lifetime guarantee.

Professionals who only want to use the best equipment in the field can never go wrong with the Shadow X5. It looks like the other models but the control switch allows the individual to do other things such as target and discrimination modes enabling the user to start digging within a few inches of the object.

The price for this baby, $1099. A little more expensive that the other models but given the special functions of this machine, the treasure will surely find a lot of things buried underneath especially when this can be used in almost any terrain.

Selecting the right metal detector will take time given that there are many brands in the market. But if the customer wants the best, there is no need to do that especially when Troy metal detectors are available in different models and can be upgraded with other accessories such as a larger coil for the unit.

Low Jeremy maintains http://metal-detector.articlesforreprint.com This content is provided by Low Jeremy. It may be used only in its entirety with all links included.

Twenty Best Metal Detector Coin Finds

Many times in reading articles about outstanding coin finds with metal detectors, the story does not relate when found and the machine used. In nearly 40 years of building coin collections using metal detectors, I have conscientiously logged the date location and metal detector used. Here is a brief accounting of my 20 favorite/best coin finds.

1. 69 A.D. Israel Half Shekel - Sept. 5th 1978 vacant lot where school built in 1917 was torn down in 1964 (Tarpon Springs, FL). Found with Fisher VLF 552 at 9 inches deep.

2. 1882 S US Silver Dollar (AU) - December 26th, 1995 on vacant lot downtown Tarpon Ave. Found with Fisher 1260 at 10 inches deep.

3. 1861 Indian Head Penny (F) - June 21st, 1988 on Hangman's Hill, Tarpon Springs (see post on Story A Coin Could Tell). Fisher 1260 at 7 inches deep.

4. 1861 Seated Half Dollar (BU 63) - November 24th, 1998 on vacant lot Lime St. Tarpon Springs. Garrett MH 7 used with Sniper Coil to find this beauty at only 4 inches deep.

5. 1812 Large Cent (AG-4) - Spring Break 1971 at Blue Sink Hole Palm Harbor, FL with MEDEFORD BFO (Jim Ford science teacher Clearwater, FL made this combo 5/12 coil machine). My oldest American coin find and was only 2 inches deep

6. 1909 S VDB Cent (AU with mint luster) - January 2nd, 2000 at a lot where house burned on Pent St., Tarpon Springs. Part of small cache found with Tesoro Silver Sabre 2 at more than a foot deep. Also included a 1885 V Nickel (G).

7. 1904 O Barber Half (XF) - September 2nd, 1978 on vacant lot next to Greek day school on Pinellas Ave., Tarpon Springs. Found with White's 6DB at less than an inch deep.

8. 1924 Standing Liberty Quarter (BU 62-63 Full Head) - September 21st at vacant lot listed on #1 above. Found with Fisher 552 VLF at 1 inch ( 243 coins predating 1940 found from Sept. - Dec. 1988 on this lot).

9. 1881 Seated Liberty Dime - MS-63 coin found Spring break 1993 on Tarpon Ave. lot where cracker barrell shaped house razed. Used Garrett MH 7 with Sniper Coil and coin was about 2 inches deep.

10. 1877 Indian Head Penny (Fair) - Found with Fisher 1260 on ball field adjacent to Tarpon Elementary at less than 3 inches deep January 3rd, 2001.

11. 1796 Counterfeit Spanish 8 Reale Coin (F) - Fisher 1280 used after a no name storm in March, 1993 brought this one up in the surf. See post - Story A Coin Could Tell.

12. 1950 D Nickel (VG) - Found within 10 inches and at same depth as coin #1 . This completed my collection of Jefferson's from 1938 - 1964.

13. 1919 S Standing Liberty Quarter (F) - Fisher 1260 with mini coil used on lot owned by church which was built in 1915 on Disston Ave., Tarpon Springs. Coin was 2 inches deep and found December 19th, 1996.

14. 1863 Civil War Merchant Token (XF) - Gustavus Lindenmueller NY merchant token found with Minelab Sovereign at Tapon Library/Park area on February 2nd, 2004 at about 5 inches deep.

15. 1885 V Nickel (G) - See #6 above as coin part of 13 semi key and key coins cache find.

16. 1913 S Buffalo Nickel (G) - This Type 2 Coin (about 3 inches deep) found at vacant school lot Sept. 6th, 1988 using Fisher VLF 552. One of 40 Buffs found there that Fall.

17. 1616 S Mercury Dime (MS-FSB) - Found trying to ground balance my new Heath Kit detector in Tarpon Springs in grass median on Orange St. Beauty only 1/2 inch deep - May 3rd, 1975. Was trying to groud balance machine and coin was beneath area.

18. 1869 Shield Nickel (G) - Found 4 inches deep after sidewalks removed in downtown Tarpon. My oldest nickel find- made with Fisher 1260 using 4 inch coil (1990).

19. 1857 Quarter (G) - Oldest Quarter find made on vacant lot on Levis Ave. (Tarpon Springs) using Fisher 1260 in August, 1992. Coin was 7 inches deep.

20. 1894 Greek 5 Lepta (VF) - Found near railroad tracks on Orange St. Tarpon Springs, using White's 6DB. Coin found March 30th , 1980 at about 5 inches deep.

Almost all of my favorite/best coin finds came from metal detecting in Tarpon Springs, Florida. My soon to be released ebook deals with the topic of hometown advantage. I have taken over 35,000 keeper coins from the land and water of Tarpon Springs a city of only 30,000 that was founded in 1886 and as late as 1970 only had 7,000 residents. People lose many coins and other treasures and having a treasure finding mindset can make a big difference for you.

http://MetalDetectorForCoinCollecting.com/free-report

Here's to "diggin" it!

Larry

Larry Smith is an avid Coin Collector and Metal Detectorist. With over 45 years experience, he's fast becoming a world renowned expert in the field. Larry has put together a free ebook sharing his advice, insight, and amazing stories. He also gives away a FREE dug coin on the 15th of every month. You can enter to win your own coin and get his free ebook right now by going to:

Metal Detecting And Coin Collecting Free Report

Watch for rattlesnakes to metal detector treasure Hunting

In the southwest of we have many species of rattlesnakes. They are very abundant. When looking for old buildings, desert areas, be alert to the fact that you can come to a snake.

Metal detecting around old buildings, trees or brush be careful when you go to pick up something or dig for a success since its metales.Serpientes detector as shade cool, especially in the summer.

About metal detecting trip looking at about a former base.There was a small tree near the Fundación. the temperature of the desert that day was hitting to 103 degrees. Not for evil with the very low
Moisture. I got a (no pun intended) strike between the Foundation and tree.Cumplí my back to the tree because it was partially offering some shade to my search area is folded down to dig hit my metal detector.That terrible sound queue "rattling" pierced the air.Very slowly, turned and rolled up below the database tree, within 4 feet was a snake rattlesnake 3 feet.

If he hit relied on affect hunting which was vistiendo.Elegido not to strike and I just wanted to be alone than leather boots. honored you want very quickly.

Here are some suggestions to be in areas where the snakes could be present.

Rattlesnakes are shy by nature, and shall not be a strike unless they feel threatened.

Be careful of where to place their hands and feet, and where you feel.

Not hold, nor collect snakes - if they are poisonous or not snakes venenosas.Mayoría fail if left alone.

Try not to go treasure hunting for yourself.If you are unfortunate and get bitten,

According to the American Red Cross, these measures should be taken:

Stay calm.

Wash with SOAP and clean water bite.

Freeze the bitten area and keep it lower heart.

If the bite is in the hand or arm remove any rings, watches, or tight clothing.

Get medical help immediately.(30 minutes)

If the victim is unable to reach medical care within 30 minutes, a bandage wrapped two to four inches above the bite, can help to poison lento.El bandage should not cut off the flow of blood from a vein or arteria.Una good general rule is that the loose enough bandwidth that can slip a finger underneath.

Just be careful when your in areas where snake I attend.

Author has more than 30 years in industry electronics. owner of business, sales and marketing, consultant member of the largest eBay, advanced user of Internet.Tesoro hunting, Buff metal detector.

For more articles and treasure hunting tips, visit; Treasure hunt